Vertical Gel Electrophoresis Units

OmniPAGE Mini

10 x 10 cm Plate Dimensions

  • Injection molded construction

  • Compatible with all 8 x 10 and 10 x 10cm precast gels

  • Rapid gel casting and loading

  • Low buffer volumes

  • Rapid set up cooling

  • Run up to four gels

 

The preferred unit for routine mini protein electrophoresis, the omniPAGE mini is constructed using the latest injection molding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength. The unit incorporates a sealing system which is compatible with all major types of 8 x 10cm and 10 x 10cm precast gel.

Gel casting and running utilize the same insert; no transfer of glass plates during gel casting is necessary. The insert contains the option of sliding clamps or just one screw per clamping bar side allowing very rapid set up of both hand cast and precast gels. Ultra soft silicone seals and pressure bars which surround the glass plates guarantee leak proof gel casting. 2mm thick glass plates prevent breakage and have bonded spacers for convenience.

Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.

 

OmniPage Mini Accessories

Clamp Insert, now standard on Mini Gel Units


OmniPAGE Mini

Plate Dimensions ( w x l)

Gel Dimensions ( w x l)

10 x 10cm

7.5 x 8cm

Unit Dimensions ( w x d x h)

9 x 13 x 15cm 

Max Sample Capacity

20 samples per gel 

Buffer Volume

Min 250ml, Max 1200ml

Comb Selections:

No samples

Thicknesses

 

1, 5, 8MC, 9, 10, 12, 16MC, 20

0.75, 1, 1.5, 2mm 

 

A complete list of sample combs is available, please contact Geneflow Technical Support

Please click here for information about Comb Volumes


Vertical Tank pdfOmniPAGE Mini Wide

20 x 10cm Plate Dimensions

  • Offers the capacity of two mini gels on a single gel

  • Rapid gel casting and loading

  • Optional low or high buffer volumes

  • Rapid set up cooling

The omniPAGE mini wide vertical gel unit with a gel width of 20cm effectively allows double the number of samples to be resolved as the omniPAGE mini unit. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve..

Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality.

4mm thick glass plates reduce breakage and have bonded spacers for added convenience. A wide range of accessories is available allowing many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery. Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.

This unit has been especially designed for researchers needing to run a larger number of protein samples over a distance of 8cm. It is ideal for situations requiring comparisons of large numbers of samples on a single gel.  A total of 96 samples can be separated in this gel tank!

 The simple set up using ultra soft silicone seals guarantees trouble free plate casting and gel loading.  4mm thick glass plates reduce breakage and have bonded spacers.

 A blotting module which fits into the gel tank is also available, and the gel can also be used as the second dimension for 2D electrophoresis.

OmniPAGE Wide

Plate Dimensions ( w x l)

Gel Dimensions ( w x l)

20 x 10cm

17.5 x 8cm 

Unit Dimensions ( w x d x h)

26 x 16 x 15cm 

Max Sample Capacity

48 samples per gel 

Buffer Volume

Min 600ml, Max 2800ml 

Comb Selections:

No samples

Thicknesses

 

1, 5, 10, 18MC,  24, 30, 36MC, 48

0.75, 1, 1.5, 2mm

A complete list of sample combs is available, please contact Geneflow Technical Support

Please click here for information about Comb Volumes


OmniPAGE Maxi

20x20 cm Plate Dimension

  • Ideal for high resolution separations

  • Rapid gel casting and loading

  • Optional low or high buffer volumes

  • Rapid set up cooling

The preferred unit for maxi protein electrophoresis, the omniPAGE maxi unit combines convenient ease of use features with high resolution separations. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting.

Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality.

4mm thick glass plates reduce breakage and have bonded spacers for added convenience. A wide range of accessories is available allowing many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery. Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.

This unit is ideal for larger protein gels creating a gel of 16 x 17.5cm (w x l).

Prep combs can be used to maximize sample loading and recovery whilst a wide range of accessories allows many techniques to be performed using the same unit.

OmniPAGE Maxi 

Plate Dimensions ( w x l)

Gel Dimensions ( w x l)

20 x 20cm

16 x 17.5cm  

Unit Dimensions ( w x d x h)

26 x 16 x 28cm 

Max Sample Capacity

48 samples per gel

Buffer Volume

Min 1200ml, Max 5600ml 

Comb Selections:

No samples

Thicknesses

 

1, 5, 10, 18MC,  24, 30, 36MC, 48

0.75, 1, 1.5, 2mm

A complete list of sample combs is available, please contact Geneflow Technical Support

Please click here for information about Comb Volumes


 
2011 Geneflow Ltd. All rights reserved.