Consort Power Supplies

All Consort Maxi Series (EV200) Power Supplies except the EV243 have four output terminals to allow four simultaneous runs. Model EV243 Mini power supply has a smaller footprint and three output terminals. While the powerful microprocessor allows complex programming, the Manual mode permits the setting of voltage, current, power and time for a routine electrophoresis run. Parameters can be changed temporarily without interrupting the run.

Programming - up to 9 different programs, each with 9 steps, can be stored in the non-volatile memory for future recall.

Timer - can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed.

Automatic cross-over - each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant.

Automatic recovery after mains failure – after restoration of power, the instrument will automatically continue the run for the remaining time.

Data Transfer - optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory.

Safety precautions - the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

Mini EV 243   Power Supply     400 V / 300 mA / 50W

This Consort Mini power supply covers the ideal voltage range generally used with small electrophoresis units. Small enough to occupy very little bench space, it is portable and has a variety of additional features:-

Manual Set-up - voltage, current and power settings can be adjusted during the run.

Voltage ramp - this allows a linear voltage gradient for any step to be programmed.

Automatic recovery after power failure.

Data-logging, Transfer and Remote control.

Storage of the run progression - stores the run progression details and allows analysis by transfer of data to a PC. The power supply can additionally be controlled by a PC.

Technical Specifications

Technical Specifications

All Consort Units are supplied with a three year warranty.

Copyright 2010 - Geneflow Ltd - All Rights Reserved